Чулуу бутлуурын бүтцийн талаар ярихдаа, плита нь нийтдээ хоёр үйлдэлтэй - нэг нь бутлах, нөгөө нь жийгдэх үйлдэл. Эхний үйлдэл нь өндөр даралтаар чулууг таслах бөгөөд хоёрдахь үйлдэл нь жижиг хэсгүүдийг цуглуулах, боловсруулах зориулалттай. Плитагийн дотоод бүтэц нь блок, хагас хагас, тал дундын хэлбэртэй байх боломжтой бөгөөд энэ нь түүний гүйцэтгэлд нөлөөлдөг.
In today’s rapidly evolving industrial landscape, the demand for drilling equipment has surged significantly. This growth can be attributed to a combination of factors, including advancements in technology, increased exploration activities, and the ongoing need for infrastructure development across various sectors. As industries continue to thrive, the sale of drilling equipment has become a vital focal point for manufacturers, suppliers, and end-users alike.
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank
1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.
3. Open-air drilling rig: according to the different working mechanism of crushing ore and rock, it is divided into steel rope percussion drill, drilling rig, cone drill and rotary drill. Because of low efficiency, the steel rope percussion drill has been gradually replaced by other drilling RIGS. The drill pipe drives the pneumatic impactor and the drill bit to rotate together, and the piston of the pneumatic impactor is used to impact the drill bit to break the ore and rock, which is usually used in small and medium-sized mines to drill holes with a diameter of 80 to 250 mm.
Jaw plates are an indispensable component of jaw crushers, playing a major role in breaking down materials efficiently in mining and construction. Understanding their importance, types, and maintenance practices can help enhance operational efficiency and reduce costs. As industries continue to evolve, the demand for robust and durable jaw plates will undoubtedly persist, emphasizing the need for ongoing innovations in materials and engineering design. By prioritizing the maintenance and replacement of jaw plates, companies can ensure that their operations remain competitive and productive in a challenging market.
Rubber slurry pumps have become indispensable in various industries, especially in mining, construction, and wastewater management. These pumps are designed to handle abrasive and corrosive materials, making them ideal for transporting slurries – mixtures of solids and liquids. The intricate process of manufacturing rubber slurry pumps involves advanced technology, skilled craftsmanship, and a deep understanding of materials. This article delves into the operations, benefits, and innovations within rubber slurry pump factories.
