A braided hose is a type of flexible hose that features an outer layer made of interwoven strands of material, usually metal (like stainless steel) or synthetic fibers. These strands provide added strength and durability to the hose, making it suitable for applications involving high pressure, temperature fluctuations, and other challenging environments. Braided hoses can be designed to carry liquids, gases, and sometimes solids, depending on the materials used in their construction.
Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”
A hydraulic hose factory is essential in supplying the critical components needed for fluid power systems across various industries. By prioritizing quality, innovation, and efficiency in their manufacturing processes, these factories ensure that hydraulic hoses perform reliably under pressure. For businesses that rely on hydraulic systems, investing in top-quality hoses from reputable manufacturers is key to maintaining operational efficiency and safety. Whether in construction, agriculture, or manufacturing, the role of hydraulic hoses cannot be overstated—they are the unsung heroes of modern industrial applications.
При выборе гидравлического шланга 3/4 дюйма необходимо учитывать несколько важных факторов. Во-первых, обратите внимание на максимальное рабочее давление, которое может выдержать шланг. Это значение должно превышать максимальное давление в вашей системе, чтобы предотвратить аварийные ситуации. Во-вторых, важно знать, с какими жидкостями будет работать шланг, так как некоторые материалы могут негативно реагировать на определенные химические соединения.
When it comes to hydraulic systems, selecting the right hoses is crucial for ensuring efficiency and safety in various applications. Among the many standards available, the SAE 100R2AT stands out as a robust choice for many hydraulic applications. This article will delve into the specifics of SAE 100R2AT hoses, their construction, applications, and benefits.
A hydraulic oil hose is a flexible tube that conveys hydraulic fluid in a hydraulic system. These hoses are specifically engineered to withstand high pressure and extreme temperatures. They typically consist of three main components the inner tube, the reinforcement layer, and the outer cover. The inner tube is made from materials that resist high temperatures and the corrosive nature of hydraulic fluids. The reinforcement layer, often made from steel wire, provides strength and durability, while the outer cover protects against abrasion and environmental factors.
At its core, a hydraulic hose hand crimper is designed to crimp the end of hydraulic hoses onto fittings. The process of crimping involves compressing the fitting onto the hose with a specific force, which creates a leak-proof seal. This is critical because hydraulic systems operate under high pressure, and any leakage can lead to system failure, safety hazards, and costly downtime.
