Although barium sulfate is almost completely inert, zinc sulfide degrades upon exposure to UV light, leading to darkening of the pigment. The severity of this UV reaction is dependent on a combination of two factors; how much zinc sulfide makes up the pigments formulation, and its total accumulated UV exposure. Depending on these factors the pigment itself can vary in shade over time, ranging from pure white all the way to grey or even black. To suppress this effect, a dopant may be used, such as a small amount of cobalt salts, which would be added to the formulation. This process creates cobalt-doped zinc sulfide. The cobalt salts help to stabilize zinc sulfide so it will not have as severe a reaction to UV exposure.
The precipitation of titanium dioxide is a crucial process in the manufacturing of this important industrial material. Titanium dioxide is a white pigment that is widely used in various industries, such as paints, coatings, plastics, and cosmetics, due to its excellent opacity, brightness, and UV resistance.
As early as sixty years ago, zinc sulphide was first thought of as a pigment for coloring India rubber and a patent for the process of its manufacture was issued in England. But it was not until twenty years later that zinc sulphide and its manufacture was seriously considered as a pigment for paint, and in 1874 a patent was issued for a process of manufacturing a white pigment, composed of zinc sulphide and barium sulphate, known as Charlton white, also as Orr's white enamel. This was followed in 1876 by a patent issued to a manufacturer named Griffith and the product, which was similar in character to Charlton white, was known as Griffith's patent zinc white. In 1879 another patent for a more novel process was obtained by Griffith & Cawley, the product made under this process proving the best of the series placed upon the market up to that date. After that time many new processes were patented, all, however, tending to the same object, that of producing a white pigment, composed of zinc sulphide and barium carbonate, the results, however, in many cases ending with failure.
As early as sixty years ago, zinc sulphide was first thought of as a pigment for coloring India rubber and a patent for the process of its manufacture was issued in England. But it was not until twenty years later that zinc sulphide and its manufacture was seriously considered as a pigment for paint, and in 1874 a patent was issued for a process of manufacturing a white pigment, composed of zinc sulphide and barium sulphate, known as Charlton white, also as Orr's white enamel. This was followed in 1876 by a patent issued to a manufacturer named Griffith and the product, which was similar in character to Charlton white, was known as Griffith's patent zinc white. In 1879 another patent for a more novel process was obtained by Griffith & Cawley, the product made under this process proving the best of the series placed upon the market up to that date. After that time many new processes were patented, all, however, tending to the same object, that of producing a white pigment, composed of zinc sulphide and barium carbonate, the results, however, in many cases ending with failure.
On the other hand, the U.S. Food and Drug Administration (FDA) in their Final Administrative Order on Sunscreen Drug Products posted in September 2021 still accepts titanium dioxide up to 25% in the list of Generally Recognized As Safe and Effective (GRASE) in the main document, without further clarification on what kind or size of particles [9]. However, on page 24 (Sunscreen containing nanomaterials) FDA clearly “distinguish nanomaterials from other forms of these ingredients'' (zinc oxide and titanium dioxide) and ask for comments on “any particular nanomaterials that you believe should not be permitted for use in OTC sunscreen products”. To the best of our knowledge, this Agency did not ban the use of nanoparticulate titanium dioxide in any form, even though it is mentioned on page 34 that the anatase form is the more photoactive one, due to the lack of evidence with real sunscreens OTC (over the counter) in vivo. Moreover, other regulations in Latin America (MERCOSUR agreement, 2006) do not state clearly their position on the use of nanoparticulate TiO2NPs [10].
In conclusion, the demand for dyes and pigments is on the rise, and having a reliable titanium dioxide factory like CAS 13463-67-7 is essential for meeting this demand. With its dedication to quality, sustainability, and innovation, CAS 13463-67-7 is well-positioned to continue serving the needs of its customers and the industry as a whole.
Inorganic pigment Lide powder, also known as zinc antimony white, is a mixed crystal of zinc sulfide and barium sulfate. It has many unique and excellent properties. Lide powder products form a series of products, such as high ZnS type, apparent treatment type, water dispersion. Type, light fastness, color type, etc., play an important role in industrial and agricultural production and daily life. Mainly used in coatings, paints, thermoplastics, thermosets, paper, etc., can replace some rutile by surface treatment or Ti0 2 coating.