An air hose crimper is a mechanical device designed to compress fittings onto the ends of hoses, creating a strong, permanent bond. This process, known as crimping, ensures that air or fluid cannot escape through the connection, thus maintaining the efficiency and safety of pneumatic systems. Crimpers are available in various sizes and configurations, catering to different hose diameters and materials.
Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”
Hydraulic systems are integral to various industries, including construction, manufacturing, and automotive. At the heart of these systems lies a crucial component the hydraulic oil hose. These hoses are designed to carry hydraulic fluid to power a range of machinery, making them essential for the smooth operation of hydraulic systems. This article explores the significance, types, features, and applications of hydraulic oil hoses.
The EN 857 1SC hydraulic hose is constructed with a single layer of steel wire reinforcement, which gives it the flexibility to endure high working pressures while maintaining structural integrity. The inner tube is usually made of synthetic rubber, designed to handle a variety of hydraulic fluids. The outer cover is also made of rubber, providing resistance against abrasion, weather, and other environmental factors.
In conclusion, air hose crimpers are invaluable tools in both automotive and industrial fields, ensuring secure and leak-proof connections in pneumatic systems. Their importance cannot be overstated, as the integrity of these connections directly impacts safety and efficiency. Whether you are a mechanic working on vehicle repairs or an engineer designing an industrial system, having the right crimper can make all the difference. By choosing the appropriate type of crimper for your specific needs, you can enhance the reliability and performance of your air hose assemblies, ultimately leading to smoother operations and greater peace of mind.
