1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank
Slurry pump in the use of the process will find blockage, so how should we deal with this problem, many customers think that this is a more complex problem, but if the blockage problem is not handled well, it will cause damage to the equipment, which will also affect the efficiency of use, then slurry pump blockage problem we should pay special attention to it. So how to deal with the slurry pump blockage problem? The following part explains the treatment method of slurry pump blockage.
In conclusion, bullet teeth for augers are essential components that significantly enhance the efficiency and effectiveness of drilling operations. Their specialized design and durable materials make them suitable for a wide variety of applications, from construction and mining to environmental assessment. Investing in high-quality bullet teeth ensures that operators can tackle tough drilling tasks with ease, ultimately driving productivity and reducing operational costs. As technology continues to evolve, advancements in bullet tooth design and manufacturing are likely to emerge, further optimizing the performance of augers and expanding their range of applications. Understanding and utilizing the benefits of bullet teeth is vital for anyone involved in drilling and excavation, enabling them to meet the challenges of their respective industries head-on.
In addition to its agricultural benefits, water well drilling plays a crucial role in infrastructure development. Urban areas are often overburdened with the demands of a growing population, leading to issues such as water shortages and reliance on insufficient municipal supplies. By investing in drilling projects, cities can enhance their water security and reduce their dependence on external sources, which can often be unreliable. Furthermore, establishing decentralized water systems through well drilling can help improve resilience against climate-related disruptions.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.
Third, the structure of the drilling rig:
The drill tool is composed of drill pipe, ball tooth drill bit and impactor. When drilling, two drill rods are used to drill. The reverse air supply structure is composed of a reverse motor, a reverse reducer, and a reverse air supply inverter. The reverse reducer is
