. The seal must be positioned correctly on the shaft, and care must be taken to avoid damaging the seal during installation. It is also important to regularly inspect and replace oil seals as needed to prevent leakage and maintain the efficiency of the equipment.
The simplest way is to know either the preferred manufacturers part number, the overall sizes of shaft diameter, housing diameter and bore depth, or use our brochure to establish the M Barnwell Services ordering reference. Many of the old traditional names of seal manufacturers have either changed or disappeared in this age of “acquisitions”. If no longer available, we will advise you and offer a suitable alternative seal, from stock whenever possible. If your concern is getting the right seals for the job, you will need to know something about the application as well as the overall sizes. If you have any doubts – contact us, we will help in your seal selection.
Polyacrylate oil seals are a perfect compromise between quality and cost. They perform well with high temperatures and chemicals, but not as well as Viton oil seals. Polyacrylate has a temperature range of -25 degrees Fahrenheit to 300 degrees Fahrenheit. Due to their outstanding resistance to hot oil and oxidation, they are commonly used in automobile transmissions and hoses; however, they are also used for shaft seals, gaskets, and o-rings.